5. Prepare the computer, install the printer software and set the IP address

Computer configuration requirements:

A. Computer system: Windows10 or above computer system.

B. CPU configuration: use i5 or above i5 CPU.

C. Memory stick: 8G or above.

D. Network card and network cable requirements:  Gigabit or above network card must 

be used, and the network cable needs to be super Category 6 or above to support 

dry-mega communication network cable.

E. Hard disk configuration:  It is recommended to use a 120G solid state hard disk as the 

system disk,  and then add a mechanical hard disk as a secondary disk as needed.

IP address set:

Open the desktop computer, find the control panel to enter,  and then select the network and sharing center.

 Find the corresponding LAN port, click Local Area Connection,  select Properties—Internet Protocol 

Version 4, and then click OK. Click to use the following IP address,  set the IP address to 192.168.127.11, 

and the subnet mask to 255.255.255.0, and then click OK. 

(Note: IP address 192.168.127.X, the last digit of X must be between 11 and 254.)

As shown:

   Refer to the following video：